Updated 15 November 2026 · 7-minute read
Good labels make scanning fast and mistakes rare. This guide covers when you need your own labels at all, Code 128 versus QR, what to encode, which label sizes to buy and how to get them to print where they should.
First: use the barcode that's already there
Most retail products already carry an EAN-13 or UPC-A barcode. Scan it into the item's barcode field and you're done — no label needed. Print your own labels for things without a usable code: loose parts, bulk stock decanted into bins, items you make yourself, and shelves or bins you want to scan to find what lives there.
Code 128 or QR?
| Code 128 | QR code | |
|---|---|---|
| Looks like | Classic black bars in a strip | Square of black modules |
| Read by | Every scanner, including cheap laser and USB scanners, and phone cameras | Phone cameras and 2D (imager) scanners — not laser scanners |
| Best for | Short codes like SKUs (up to about 15 characters on a 2⅝ in label) | Longer codes, small or awkward spots, scanning at an angle |
| Needs | Width: the longer the code, the wider the label | A square area; survives some damage |
Rule of thumb: if anyone uses a laser or older USB scanner, print Code 128. If everyone scans with phones, QR is more forgiving — it reads from any angle and copes with long codes and smudges.
What to put in the code
Encode a short, stable identifier — the product's own barcode if it has one, otherwise your SKU. Don't encode the item name (names change and get long) and don't encode a web link (labels outlive websites, and a link on a shelf can leak information). StockKit's labels encode the item's barcode value, or its SKU when it has no barcode, and print the name and SKU underneath for humans.
Keep SKUs short and unambiguous: PEN-BLU-12 is better than Blue pens box of twelve (new supplier). Avoid letters that look like numbers (O and 0, I and 1) if people ever type codes by hand.
Label sizes that work
| Label | Size | Per sheet | Good for |
|---|---|---|---|
| Avery 5160 (US Letter) | 2⅝ × 1 in | 30 | Shelf edges, bins, boxes |
| Avery L7160 (A4) | 63.5 × 38.1 mm | 21 | Bins and boxes; room for a QR code and a longer name |
| Thermal roll | 2 × 1 in (50.8 × 25.4 mm) | One per label | Labelling stock as it arrives, one item at a time |
Sheets suit a laser or inkjet printer you already own. A desktop thermal printer is worth it once you label every delivery: no ink, and labels come out one at a time.
Printing tips
- Print at 100% (“Actual size”). “Fit to page” shrinks the sheet slightly and every label drifts off its sticker. This is the number one cause of misaligned labels.
- Test on plain paper first. Hold the printout against a label sheet up to the light before using real labels.
- Reuse part-used sheets. StockKit lets you start printing at any label position, so half a sheet isn't wasted.
- Black on white, matte if possible. Glossy labels and clear tape over a barcode cause glare that phone cameras struggle with.
- Leave the quiet zone. The blank margin either side of a Code 128 barcode is part of the code. Don't trim it or stick labels over edges.
- Direct thermal fades. Direct-thermal labels darken in heat and fade in sunlight; for long-term shelf labels use laser sheets or thermal-transfer labels with a ribbon.
- Cold and wet places (freezers, outdoor yards) need synthetic labels with freezer-grade adhesive.
Shelf labels versus item labels
Labelling every single item is rarely worth it. A label on the shelf edge or bin front is scanned the same way, costs one label instead of fifty, and never leaves with the stock. Label individual items only when they move around on their own — tools, kits, cases.
Printing labels in StockKit
Tick the items on the Items page and choose “Print labels”, or search for them on the Labels page. Pick Avery 5160, L7160 or 2 × 1 in thermal, choose Code 128 or QR, set how many copies of each, and download the PDF — it's made in your browser, so nothing is uploaded to a print service.