How to do a stock count

Updated 15 November 2026 · 8-minute read

A stock count (or stock-take) checks that what's on your shelves matches what your records say. You don't have to close for a day to do it. This guide covers full counts versus cycle counts, why blind counting works, and what to do about the differences you find.

Full counts and cycle counts

A full count counts everything at once. It gives a clean snapshot, but it usually means closing or working late, and tired people miscount. A cycle count counts a small part of the stock — one shelf, one aisle, one van — on a rolling schedule, so everything gets counted over a few weeks without stopping work.

Most small businesses do best with cycle counts plus an occasional full count (for example at year end). A simple schedule:

A cycle-count schedule by item importance
ItemsWhich onesCount every
AThe fifth of items that make up most of your sales, usage or valueMonth
BThe next third or soQuarter
CSlow, cheap itemsSix months

Counting by location is easiest in practice: “Shelf A every Monday” is a habit people keep. Put your A items on shelves that get counted most often.

Count blind

In a blind count the counter doesn't see the expected quantity. It sounds harsh, but it matters: if the sheet says 24, a quick glance at roughly two dozen boxes becomes “24”. Without the number, people actually count. Show the expected quantity only at review time, to whoever approves the differences.

How to count without closing

  1. Pick a small area you can finish in one go — a shelf, a bay, a van.
  2. Agree what “in the area” means. Stock in the delivery bay waiting to be shelved isn't on the shelf yet; receive it first or leave it out.
  3. Keep recording sales and use as normal. The trick is to compare each count with the expected quantity at the moment that item was counted, not with a snapshot from the start of the day.
  4. Count each item once, carefully. Left to right, top to bottom. Count in the unit you stock (boxes, rolls, lengths).
  5. Recount the big differences before anyone changes the records — ideally a second person.
  6. Apply the adjustments with the reason “count”, so the history shows where each change came from.

StockKit does step 3 for you: when a line is counted, it stores what the system expected at that moment. Sales and deliveries after that are kept when you apply the count, so you never undo a sale by applying an old snapshot.

Counting with a team

Split the area so two people never count the same shelf. In StockKit, everyone opens the same count on their own phone, scans or searches each item and enters the quantity; each line saves immediately with who counted it, and the progress bar shows how much is left. If someone recounts a line, the newer number wins and the history shows who changed it.

Dealing with differences

A difference (or variance) is counted minus expected. Some are inevitable; what matters is the size and the pattern.

Uncounted items

If an item is expected on the shelf but nobody counted it, decide whether it's really gone (count it as zero) or just missed (leave it for the next count). StockKit asks you this when you apply a count: uncounted lines are left alone unless you choose to treat them as zero.

After the count

Prefer paper? Our printable stock count sheet has the same columns.

Run your next count on phones

Several people count at once, lines save as they go, and the differences apply in one step.

Create a free workspace